WhoKnew Views™ | Loading and Applying Presets

Skip to main content
Table of Contents
Print

Instant Strategy Switching: Load Presets Globally, Per-Product, or On-the-Fly

🔄 Loading & Applying Presets: Four Powerful Ways to Switch Configurations

You’ve created custom presets and explored WhoKnew Views™ Pro’s 16 built-in options. Now what? The real power of presets emerges when you understand where and how to apply them. Flash sale starts? Load “High FOMO” preset globally in 3 seconds. Single product needs aggressive padding? Apply custom preset to just that product. Returning customers might notice sudden jumps? Use drift mode for seamless transitions.

This article covers four distinct application methods—each designed for different scenarios. Master these workflows, and you’ll adapt faster than competitors can react.

Presets are useless until applied.
Four methods. Four different powers. Master them all.

🗺️ The Four Preset Application Methods

MethodWhere It’s UsedScopeBest For
1. Global DefaultPresets page (🌐 button)Site-wide (preserves product customizations)Normal preset switching
2. Apply to All ProductsPresets page (📦 button)Site-wide (removes ALL customizations)Fresh starts, post-holiday resets
3. Product-Specific OverrideProducts page (Activate button)Single product (ignores global defaults)Hero products, special promos
4. Single Product Meta SidebarSingle product edit page (sidebar)Single product (quick edits)Fast tweaks while editing product

🎯 Key Concept: Methods 1-2 apply globally (site-wide settings). Methods 3-4 apply per-product (custom overrides for specific products). Per-product overrides always trump global settings.

🌐 Method 1: Set as Global Default (Presets Page)

This is the standard way to switch presets site-wide. It updates your global settings while preserving any per-product customizations you’ve already configured.

📍 Step-by-Step: Applying Global Default
1️⃣ Navigate to Presets Page
  • Go to WooCommerce → WhoKnew Views → Presets
  • You’ll see all 16 built-in presets + your custom presets
2️⃣ Select the Preset to Apply
  • Click the radio button next to your desired preset
  • Example: “Medium Traffic,” “Flash Sale,” or “My Custom Boost”
  • The preset card highlights when selected
3️⃣ Choose Application Mode

Below the preset cards, you’ll see two application mode buttons:

ModeIconBehaviorBest For
Apply Immediately🚀Baselines change instantly—view counts jump to new ranges nowNew stores, product launches, inactive products
Apply with Drift🌊Baselines adjust gradually over 6-144 hours (configurable in Drop Rate settings)Established stores, returning customers, subtle shifts

Click one of the mode buttons to select your preferred transition style. The selected button highlights (blue for Immediate, green for Drift).

⚠️ Example: A customer sees 120 views today. You apply a “High Traffic” preset. Immediately: They return tomorrow, see 450 views (might look suspicious). With Drift: Count gradually rises to 450 over 3-5 days (looks natural).

4️⃣ Click “🌐 Set as Global Default”
  • Blue button below the application mode selector
  • System applies the selected preset to your global settings
  • Products without custom overrides immediately use the new preset
  • Products with custom overrides continue using their custom settings (unaffected)
5️⃣ Success Confirmation
  • Success message: "Preset applied successfully"
  • Selected preset radio button remains checked
  • New settings are now live for all non-customized products
🎯 When to Use “Set as Global Default”
  • ✅ Normal preset switching (e.g., “Medium Traffic” → “Flash Sale” during promotions)
  • ✅ Seasonal transitions (e.g., Summer → Fall → Holiday settings)
  • ✅ Preserving hero product customizations (your manually-tuned products stay untouched)
  • ✅ Safe experimentation (apply new preset, test, revert if needed—custom products unaffected)
🔍 What Happens Behind the Scenes
  1. 📦 System retrieves preset settings from database (built-in or custom)
  2. 💾 Updates global settings in `whoknew_views_settings` option
  3. 🎯 Checks each product:
    • If product has _wkv_use_custom_settings = false → Uses new global settings
    • If product has _wkv_use_custom_settings = true → Continues using custom override (ignores global)
  4. ⚡ Application mode determines transition:
    • Immediate: Baselines update instantly
    • Drift: Target Baseline Drift activates, gradually moving baselines to new values

📦 Method 2: Apply to All Products (Presets Page)

This is the nuclear option—it wipes out ALL per-product customizations and resets your entire store to the selected preset. Use with caution.

📍 Step-by-Step: Applying to All Products
1️⃣ Navigate to Presets Page
  • Go to WooCommerce → WhoKnew Views → Presets
2️⃣ Select Preset & Application Mode
  • Check the radio button next to your desired preset
  • Choose Apply Immediately (🚀) or Apply with Drift (🌊)
3️⃣ Click “📦 Apply to All Products”
  • Gray button next to “Set as Global Default”
  • Confirmation dialog appears: "This will remove ALL custom product settings and apply '[Preset Name]' universally. Are you sure?"
  • Click “OK” to confirm (or “Cancel” to abort)
4️⃣ System Resets All Products
  • Sets _wkv_use_custom_settings = false for EVERY product
  • Deletes ALL custom settings stored in `_wkv_custom_settings` meta key
  • Every product now uses the selected preset (no exceptions)
5️⃣ Success Confirmation
  • Success message: "Preset applied to all products successfully"
  • All products now display identical padding behavior (based on selected preset)

⚠️ WARNING: This action is destructive. All carefully-tuned per-product customizations (hero products, special promos, etc.) are permanently deleted. You cannot undo this without restoring from backup. Always use “Set as Global Default” unless you explicitly want to wipe everything.

🎯 When to Use “Apply to All Products”
ScenarioWhy Use This Method
Post-Holiday ResetAfter Black Friday, revert ALL products (including custom overrides) back to “Steady Traffic”
Brand New StoreStarting fresh with zero customizations—apply “Brand New Store” universally
Store-Wide Re-CalibrationTested a new baseline strategy—now apply it everywhere, wiping old experiments
Consistency EnforcementToo many products have custom overrides—simplify by resetting all to one preset

✅ Pro Tip: If using “Apply to All Products,” always choose “Apply with Drift” mode. This prevents sudden, suspicious jumps for returning customers. Baselines gradually adjust over 6-144 hours—customers never notice the shift.

🎯 Method 3: Product-Specific Override (Products Page)

This method applies a preset to one specific product only, creating a custom override that ignores global settings. Perfect for hero products or special promotions.

📍 Step-by-Step: Activating Product-Specific Preset
1️⃣ Navigate to Products Page
  • Go to WooCommerce → WhoKnew Views → Products
  • You’ll see a table listing all products with view count data
2️⃣ Find Your Target Product
  • Locate the product you want to customize
  • Look at the “Actions” column on the right
3️⃣ Click “Activate” Button
  • For products without custom settings, you’ll see an “Activate” button
  • For products with existing custom settings, you’ll see an “Edit” button (same modal)
  • Clicking either button opens the “Customize Product Settings” modal
4️⃣ Select Preset in Modal

The modal has three key sections:

  • 🎯 Preset Selector (Top): Dropdown showing all built-in + custom presets
    • Select the preset you want to apply (e.g., “High Traffic,” “Flash Sale”)
    • All fields below auto-populate with that preset’s values
  • ⚙️ General Tab: Shows baseline, view window, soft caps, display limits
    • Values pre-fill from selected preset
    • You can edit any field to create a custom variant
  • 📊 Variation Tab: Shows Zone 1/2/3 ranges and thresholds
    • Values pre-fill from selected preset
    • Edit to customize variation behavior for this product

🎯 Key Feature: Changing the preset dropdown instantly updates all fields in the modal. This lets you quickly compare presets or start with one preset and tweak specific values before applying.

5️⃣ Choose Application Mode

Below the tabs, you’ll see two mode buttons (same as global application):

  • 🚀 Apply Immediately: This product’s baselines change instantly
  • 🌊 Apply with Drift: This product’s baselines adjust gradually (6-144 hours)
6️⃣ Click “Apply Settings”
  • Green button at bottom of modal
  • Confirmation dialog: "Apply '[Preset Name]' to this product? Application Mode: [Immediate/Drift]"
  • Click “OK” to confirm
7️⃣ Product Now Has Custom Override
  • Product sets _wkv_use_custom_settings = true
  • Settings saved in `_wkv_custom_settings` meta key
  • This product now ignores global settings completely
  • On Products page, the “Actions” column now shows “Edit” and “Deactivate” buttons
🎯 When to Use Product-Specific Overrides
  • 🏆 Hero products: Your best-seller needs aggressive FOMO—apply “Viral Moment” preset to just that product
  • 🎁 Special promotions: Limited-time offer? Apply “Flash Sale” to those 5 products only
  • 💎 Luxury items: High-end products need conservative padding—apply “Luxury/Premium” preset individually
  • 🆕 Product launches: New product? Apply “Product Launch Hype” to build initial momentum
  • 🧪 A/B testing: Test “Aggressive FOMO” on Product A vs “Conservative” on Product B—compare conversions

📝 Method 4: Single Product Meta Sidebar (Product Edit Page)

This is the quickest way to apply a preset while editing a product—no need to navigate to the Products page. The sidebar is context-aware and shows the current preset state.

📍 Step-by-Step: Sidebar Preset Loading
1️⃣ Edit Any Product
  • Go to Products → All Products in WordPress admin
  • Click “Edit” on any product
2️⃣ Locate WhoKnew Views™ Meta Box
  • Scroll to the right sidebar (or below main editor if sidebar is collapsed)
  • Look for “WhoKnew Views™ – Number Padding Settings” meta box
  • If collapsed, click to expand it
3️⃣ Enable Custom Product Settings (If Needed)
  • Check the “Use Custom Product Settings” checkbox at the top
  • This reveals all preset and configuration fields below
  • If already checked (product has existing overrides), skip this step
4️⃣ Select Preset from Dropdown
  • Preset dropdown shows:
    • Current state: “Global Default,” specific preset name, or “Custom Settings”
    • All 16 built-in presets
    • All your custom presets
  • Select a preset from dropdown
  • All fields in the sidebar instantly populate with that preset’s values

💡 Pro Tip: The dropdown shows “Custom Settings: 100–500 views, 48 hours” if the product’s settings don’t match any preset. This lets you know you’ve manually tweaked values. Selecting a preset replaces those custom values.

5️⃣ Choose Application Mode
  • Two buttons: 🚀 Apply Immediately or 🌊 Apply with Drift
  • Click to select your preferred mode (button highlights when selected)
6️⃣ Save Product
  • Click “Update” button (top-right or bottom-right of product edit page)
  • WordPress saves the product with new preset settings applied
  • Application mode triggers (immediate or drift) for that product
🎯 When to Use Sidebar Method
  • ⚡ Quick edits: You’re already editing a product’s description—apply preset without leaving the page
  • 🔄 Context switching: Working in product edit workflow—no need to switch to Products page
  • 🧪 Fast experimentation: Edit product → Load preset → Preview frontend → Adjust → Repeat
  • 📊 Reviewing multiple products: Open 5 products in tabs → Apply presets to each → Done

🔄 Application Modes Deep Dive: Immediate vs Drift

All four methods offer two application modes. Understanding the difference is critical for customer perception.

🚀 Apply Immediately
How It WorksBaselines update instantly—view counts jump to new preset ranges within seconds
Customer ExperienceCustomer sees 120 views today. Refreshes page: 450 views. Sudden change is visible.
Best ForBrand new stores, product launches, inactive products (where sudden jumps won’t be noticed)
RiskReturning customers might see dramatic changes—could appear suspicious or inconsistent
🌊 Apply with Drift
How It WorksBaselines gradually adjust over 6-144 hours (configurable in Drop Rate settings) using Target Baseline Drift system
Customer ExperienceCustomer sees 120 views today. Tomorrow: 180 views. Day 3: 280 views. Day 5: 450 views. Gradual, natural-looking rise.
Best ForEstablished stores, returning customers, subtle strategy adjustments
AdvantageChanges are imperceptible—customers never notice the shift, maintaining authenticity

✅ Best Practice: Always use “Apply with Drift” for “Apply to All Products” (Method 2). This prevents your entire store from showing sudden, suspicious jumps. Drift time is based on the gap between old baseline and new baseline—bigger gaps take longer (6-144 hours).

🧭 Decision Tree: Which Method Should You Use?

Not sure which application method fits your scenario? Follow this decision tree:

📍 Start Here: What’s Your Goal?
  1. Change site-wide default for all products?
    • → Do you want to preserve existing per-product customizations?
      • ✅ Yes: Use Method 1 (Set as Global Default)
      • ❌ No, wipe everything: Use Method 2 (Apply to All Products) + Drift mode
  2. Customize a single specific product?
    • → Are you currently on the Products page?
      • ✅ Yes: Use Method 3 (Activate Button)
      • ❌ No, editing product page: Use Method 4 (Sidebar)
  3. Need to customize multiple specific products?
    • → Use Method 3 repeatedly for each product (or bulk select + apply in future updates)

🔗 Preset Hierarchy: What Trumps What?

Understanding the hierarchy is critical when mixing global and per-product presets:

PrioritySetting TypeBehavior
1 (Highest)Per-Product Custom OverrideProduct ignores ALL global settings, uses its custom preset
2 (Lower)Global Default PresetApplies to ALL products without custom overrides

🎯 Example: Global default = “Medium Traffic.” Product A has custom override = “Flash Sale.” Product B has no custom settings. Result: Product A uses “Flash Sale” (ignores global). Product B uses “Medium Traffic” (follows global). Change global to “High Traffic”? Product A stays “Flash Sale.” Product B switches to “High Traffic.”

🚫 Common Mistakes When Applying Presets

1️⃣ Using “Apply to All Products” When You Meant “Set as Global Default”
  • Result: All carefully-tuned hero product customizations are deleted
  • Fix: Always read button labels carefully—”Apply to All Products” is destructive
2️⃣ Using Immediate Mode for Established Stores
  • Result: Returning customers see sudden, suspicious jumps in view counts
  • Fix: Use “Apply with Drift” for any store with repeat visitors
3️⃣ Forgetting Per-Product Overrides Exist
  • Result: You change global preset, but hero products don’t update (because they have custom overrides)
  • Fix: Check Products page—products with custom overrides show “Edit” button, not “Activate”
4️⃣ Not Testing After Application
  • Result: Applied preset, didn’t check frontend—discover misconfiguration during peak traffic
  • Fix: Always visit frontend after applying presets to verify view counts look correct

Presets are only powerful when applied correctly. Master these four methods, choose the right application mode, and watch your store adapt to every moment—faster than competitors can react. 🚀

Share